Founded in 1976, Fai Filtri is a healthy Italian company with its headquarters located in Pontirolo Nuovo (BG). It manufactures parts and filters for the aftermarket, hydraulics, discharge machining, air/oil separation and industrial plant engineering fields.
Years of experience in this field have shown to Fai Filtri the need for more and more effective control measures for contamination levels of hydraulic fluids and fuels. With its outstanding advantages, and thanks to its intricate designs and the use of advanced materials and technologies, FAI FILTRI has designed a complete range of spin-on filters, in models and different sizes, designed to meet a wide range of filtration and operating requirements, to allow more effective control of contamination levels in hydraulic, lubricating, engine, etc.
CS-CTT spin-on cartridges are designed to provide effective solutions to filtration problems, delivering peak performance when fitted to the inlet, return and exhaust lines of mobile machinery. (such as excavators, agricultural machines, industrial vehicles, air compressors, hydraulic systems) with working pressures up to 12 bar. The fundamental feature of these elements is the ability, for any clogged filter, to be easily replaced, by a quick and clean process, the condition of which should be considered very important in working contexts where severely degraded environmental conditions often occur.

They can support flow rates up to 270l/min and each element can be equipped with a bypass valve and an anti-hollow membrane (CTT Series). FAI FILTRI rotary filter tubes, equipped with new generation “A” filter media, are able to provide high performance standards even under the harshest conditions. Class “A” element with absolute filtration capacity of 3, 6, 10, 25 microns (ßβx ≥ 200), formed by inorganic impregnated and resin bound inert microfibers, supported upstream and downstream. The result is a very compact filter element that ensures resistance to media distortion, distortion and distortion, preventing any contaminants from escaping, thus improving filtration performance and allowing Contamination efficiency accumulates, also in the case of phenomena such as high differential pressure and water hammer originating from cold start and flow rates. The features mentioned above make the FAI FILTRI rotary filter suitable for the use of hydraulics, lubricating oils, fuels, water glycols, emulsions and most synthetic fluids.

SPECIFICATIONS
Material Type
• Galvanized steel plate
• Perforated/drilled support pipe and end cap in galvanized steel
Pressure value of filter tube
Maximum operating pressure: 12 bar
Pulse test in accordance with ISO 3724: from 0-12-0 bar 1Hz 50,000 min. cycle
Tests are performed on filter elements
The differential opening and closing pressure of the filter elements tested in accordance with ISO 2941:
Type "P" 5 bar
Type “A” & “M” TILL
Resistance to axial deformation tested to ISO 3723.
Manufacturing conformance and first bubble point determination/assessment in accordance with ISO 2942.
Filter Elements
• “P”: nominal 10 and 25 micrometers made from impregnated cellulose fibers βx > 2
• “A ”: 3, 6, 10, 16 and 25 are made entirely of inorganic microfibers ßβx ≥ 200 reinforced with a polyester protective layer.
• “M”: 60 and 90 nominal micrometers made of wire mesh/gauze
Working temperature
From -25°C to +110°C. (For different temperatures, please contact us for Technical advice)
Flow
From 20 to 190l/min
Select the filter tube according to the filter and recommended pressure drop.

If you need more advice about Fai Filtri Oil Filter or any other type of air compressor spare parts, please contact HOTLINE: 0902.901.804, IES will answer all your questions. IES always takes quality as the top reputation, committed to providing 100% genuine products with the best price for customers!