DESCRIBE
Founded in 1976, Fai Filtri is a healthy Italian company with its headquarters located in Pontirolo Nuovo (BG). It manufactures parts and filters for the aftermarket, hydraulics, discharge machining, air/oil separation and industrial plant engineering fields.
Years of experience in this field have shown to Fai Filtri the need for more and more effective control measures for contamination levels of hydraulic fluids and fuels. With its outstanding advantages, and thanks to its intricate designs and the use of advanced materials and technologies, FAI FILTRI has designed a complete range of spin-on filters, in models and different sizes, designed to meet a wide range of filtration and operating requirements, to allow more effective control of contamination levels in hydraulic, lubricating, engine, etc.
CSD filter tube, designed to support medium pressure values ​​up to maximum. 50 rods, providing a valid solution to filtration problems, providing good performance when fitted to hydraulic actuators, in the presence of supercharged hydrostatic actuators, earthmoving machinery, machines compressors, converters, hydraulic return systems or discharge lines.
The fundamental feature of these elements is the ability, for any clogged filter, to be easily replaced, by a quick and clean process, the condition of which should be considered very important in working contexts where severely degraded environmental conditions often occur. They can support flow rates up to 270l/min.
SPECIFICATIONS
Material Type
• Galvanized steel plate
• Perforated/drilled support pipe and end cap in galvanized steel

Pressure value of filter tube
Maximum operating pressure:35 bar / 500 psi (for CSD400: 25 bar)
Pulse test in compliance with ISO 3724: from 0-35-0 bar 1Hz 50,000 min. cycle from 0-25-0 bar 1Hz 50,000 minutes. cycle (CSD400)
Tests are performed on filter elements
Differential opening and closing pressure of tested filter elements in accordance with ISO 2941: 20 bar
Resistance to axial deformation tested to ISO 3723.
Manufacturing conformance and first bubble point determination/assessment in accordance with ISO 2942.
Filter Elements
• “P”: nominal 10 and 25 micrometers made from impregnated cellulose fibers βx > 2
• “A ”: 3, 6, 10, 16 and 25 are made entirely of inorganic microfibers ßβx ≥ 200 reinforced with a polyester protective layer.
Working temperature
From -25°C to +110°C. (For different temperatures, please contact us for Technical advice)
Flow
Flow rate Up to 180 l/min.
Select the filter tube according to the filter and recommended pressure drop.

If you need more advice about Fai Filtri Oil Filter or any other type of air compressor spare parts, please contact HOTLINE: 0902.901.804, IES will answer all your questions. IES always takes quality as the top reputation, committed to providing 100% genuine products with the best price for customers!